J12 Lacquer Retarder

• Helps eliminate blushing in extreme humid or cold conditions.
• Prevents orange peel cause by rapid drying.
• Add to spray lacquer so the lacquer can be brushed and still achieve good flow-out gloss.

J13 Fish-Eye Eliminator

• Helps prevent fish eye depressions caused by silicone contamination.
• Improves flow-out and gloss.

G5 Acidic Corrosion Remover

• Inhibited acidic solution, powerful & fast acting surface rust and corrosion remover.
• May be used full strength or diluted with water.

G4 Liquid Wood Bleach

• 1 part wood bleach
• 15% Hypochlorite solution capable of removing aniline dyes and other wood stains.

Oxalic Acid (Powder)

• Mixed in water to remove stains from wood.
• Will not destroy wood fibers.

R105 Denatured Alcohol

• Solvent rinse for strippers.

R155 Boiled Linseed Oil

• Drying oil for finished application.

R086 Acetone

• Wiping solvent, very effective on metal parts.

R031 TSP (Trisodium Phosphate)

• Comes in powder form.
• Add to water as a powerful detergent.

R037 Toluene

• Removes wax and solubilized resins.

R006 Methanol

• Rapid evaporating alcohol – Use with caution.

G21 Rust Inhibitor

• Used on ferrous surfaces preventing flash rust.
• Non-flammable. Water soluble.
• Effective surface tension reduction to allow rapid penetration and coverage of surface rust in corners and crevices.
• Very effective on iron and steel surfaces.
• Easily washes off before powder coat or paint application.

J4 Slow Flash Thinner

• Excellent thinner for warm or humid environments.
• Helps prevent blushing.

J3 Mineral Spirits

• High quality aliphatic hydrocarbon blend
• Used for thinning enamels, varnishes and polyurethanes.

R2 Non-Flammable Organic Rinse

• Oil based slow evaporating stripper rinse.

CV 65 Economical After-Wash Rinse

• Stripper rinse

R3 Premium Afterwash

• Rapid evaporating stripper rinse

J2 Wash Thinner

• Inexpensive, rapid flash thinner.
• Excellent cutting power.

J1 Lacquer Thinner

• Medium flash thinner with superb cutting and thinning power.
• Recommended to use on all solvent-borne lacquers, sealers and finishes.
• Formulated with the highest quality virgin solvents.

Sanding Sealer

• Nitrocellulose high build sealer for interior woods.
• Very efficient at filling pores of open grained woods.
• Easy flow out. Does not roll or gum when sanded.
• Blush resistant, fast drying.
• Compatible with a wide range of topcoats.

Flat Nitrocellulose Precatalyzed Lacquers

High quality, durable Precatalyzed finishes for improved performance and durability for finishing interior wood products.

These Precatalyzed lacquers contain ureaformaldehyde resin cross-linked by sulfonic acid catalyst. Formaldehyde levels in the product are low.

Blush resistant, rapid drying coatings with excellent cold check resistance, excellent print resistance and excellent adhesion.

Provides improved resistance to household chemicals.

Excellent mar resistance, chemical and water resistant film.

Semi Gloss/Satin Nitrocellulose Precatalyzed Lacquers

• High quality, durable Precatalyzed finishes for improved performance and durability for finishing interior wood products.
• These Precatalyzed lacquers contain ureaformaldehyde resin cross-linked by sulfonic acid catalyst. Formaldehyde levels in the product are low.
• Blush resistant, rapid drying coatings with excellent cold check resistance, excellent print resistance and excellent adhesion.
• Provides improved resistance to household chemicals.
• Excellent mar resistance, chemical and water resistant film.

Gloss Nitrocellulose Precatalyzed Lacquers

• High quality, durable Precatalyzed finishes for improved performance and durability for finishing interior wood products.
• These Precatalyzed lacquers contain ureaformaldehyde resin cross-linked by sulfonic acid catalyst. Formaldehyde levels in the product are low.
• Blush resistant, rapid drying coatings with excellent cold check resistance, excellent print resistance and excellent adhesion.
• Provides improved resistance to household chemicals.
• Excellent mar resistance, chemical and water resistant film.

Flat Nitrocellulose Lacquers

• Alcohol and water resistant.
• Formulated with the highest quality resins, plasticizers and solvents.
• Blush resistant, rapid drying, and excellent cold check resistance and adhesion.

Semi-Gloss/Satin Nitrocellulose Lacquer

• Alcohol and water resistant.
• Formulated with the highest quality resins, plasticizers and solvents.
• Blush resistant, rapid drying, and excellent cold check resistance and adhesion.
• Can be rubbed for higher sheen.

Gloss Nitrocellulose Lacquer

• Alcohol and water resistant.
• Formulated with the highest quality resins, plasticizers and solvents.
• Blush resistant, rapid drying, and excellent cold check resistance and adhesion.
• Can be rubbed for higher sheen.