Benco Sales > Metal Strippers > Semi-Paste Metal Strippers

Benco Sales Semi-Paste Metal strippers are for use on vertical surfaces and items too large or oddly shaped for an immersion tank . Our semi-paste strippers are formulated with the highest quality solvents, surfactants and additives for a long wet life and superior vertical cling. They are all non-flammable and water rinsable. Semi-paste strippers should be applied by brush or roller in one direction. Let it set until coating begins lifting. Some semi-paste strippers can be used in high pressure stainless spray guns with Teflon® tip. Benco Sales metal strippers are extremely aggressive.  In many cases they will strip the hardest finishes from metal in only 3-5 minutes making them the most cost-effective stripper you can buy.  Safety gear and proper ventilation is imperative when using any Benco Sales strippers. Benco Sales Semi-Paste strippers are formulated for specific applications for maximum effectiveness. Please call Benco Customer Service for help in choosing the best stripper for your application.

More Info

B15 is our most aggressive semi-paste stripper and essentially B17 in a semi-paste form for use where objects are too large to submerge in a tank. Use for large heavy industrial equipment stripping, large powder coated or epoxied appliances and other field-oriented applications where you must bring the stripping to the item. Also frequently used as an airplane or aircraft stripper where speed of removal is of primary importance.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B15

  • Semi-paste stripper for use on vertical surfaces and items too large for a dip tank system,
    non-flammable, water rinse.
  • Extremely aggressive stripping action on all coatings.
  • Effective on powder coat polyesters and nylons, catalyzed finishes, epoxies, electroplate as well as conventional paints.
  • Not for use on zinc or magnesium surfaces.
  • Apply by brush or roller. Can be sprayed with a high pressure stainless steel spray system.

SPECIFICATION

  • Specific Gravity—1.195 (9.97 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—191 grams/liter      (1.59lbs./gal)
  • Boiling Point—104 degrees F
  • Freeze Point—Less than -40 F
  • Flash Point—N / A

CONTAINERS

Available in 5 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

B12 is our most popular aircraft stripper and better suited for more fragile metals like zinc, magnesium and delicate aluminum parts. It has a spray viscosity and can be plastic wrapped and left on overnight. B12 has also been proven effective in marine restoration for removing anti-fouling paints that are used below the water line on fiberglass hulls.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B12 (Preferred by Aircraft Strippers)

  • Semi-paste, non-flammable, water rinse.
  • Safe to use on most metal surfaces, including magnesium and zinc.
  • Rapidly strips polyurethanes and epoxies.
  • Long wet life and clings to vertical surfaces, spray-able viscosity.
  • Appropriate for aircraft.
  • Safety gear and proper ventilation necessary while using this product.

SPECIFICATION

  • Specific Gravity1.95 (9.97 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—175 grams/liter      (1.46lbs./gal)
  • Boiling Point—104 degrees F
  • Freeze Point—Less than -40 F
  • Flash Point—N / A

CONTAINERS

Available in 5 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

A non-methylene chloride formula for use on coated metal finishes, architectural railings and aluminum windows. Can also be used for wood decks.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B95

  • Semi-paste.
  • Low evaporation rate.
  • Ideal aircraft stripper.
  • Slower acting than B14.
  • Appropriate for wood, metal, concrete & brick
  • Safety gear and proper ventilation necessary while using this product.

SPECIFICATION

  • Specific Gravity1.01  (8.41 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—0 grams/liter    
  • Boiling Point—219 degrees F
  • Freeze Point—Less than -30 F
  • Flash Point—>200 degrees F

CONTAINERS

Available in 5 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

 

BSI Companies | Benco Sales, Inc. | Besway Systems
123 Stout Drive, Crossville, TN 38555