- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
Oxalic Acid (Powder)
- Mixed in water to remove stains from wood.
- Will not destroy wood fibers.
SPECIFICATION
CONTAINERS
Oxalic Acid (Powder)
Available—1 gallon, 2 gallon and 5 gallon containers.
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
R155 Boiled Linseed Oil
- Drying oil for finished application.
SPECIFICATION
CONTAINERS
R155 Boiled Linseed Oil
Available—1 gallon and 5 gallon pail.
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
R105 Denatured Alcohol
- Solvent rinse for strippers.
SPECIFICATION
CONTAINERS
R105 Denatured Alcohol
Available—1 gallon, 5 gallon pail, 30 and 55 gallon drums
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
R086 Acetone
- Wiping solvent, very effective on metal parts.
SPECIFICATION
CONTAINERS
R086 Acetone
Available—1 gallon, 5 gallon pail, 30 and 55 gallon drums
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
R031 TSP (Trisodium Phosphate)
- Comes in powder form.
- Add to water as a powerful detergent.
SPECIFICATION
CONTAINERS
R031 TSP (Trisodium Phosphate)
Available—1 gallon and 5 gallon pail.
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
R037 Toluene
- Removes wax and solubilized resins.
SPECIFICATION
CONTAINERS
R037 Toluene
Available—1 gallon container
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
R006 Methanol
- Rapid evaporating alcohol – Use with caution.
SPECIFICATION
CONTAINERS
R006 Methanol
Available—5 gallon pail.
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
G4 Liquid Wood Bleach
- 1 part wood bleach
- 15% Hypochlorite solution capable of removing aniline dyes and other wood stains.
SPECIFICATION
CONTAINERS
G4 Liquid Wood Bleach
Available—1 gallon, 5 gallon pail and 55 gallon drums
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
G5 Acidic Corrosion Remover
- Inhibited acidic solution, powerful & fast acting surface rust and corrosion remover.
- May be used full strength or diluted with water.
SPECIFICATION
CONTAINERS
G5 Acidic Corrosion Remover
Available—1 gallon, 5 gallon pail and 55 gallon drums
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
G21 Rust Inhibitor
- Used on ferrous surfaces preventing flash rust.
- Non-flammable. Water soluble.
- Effective surface tension reduction to allow rapid penetration and coverage of surface rust in corners and crevices.
- Very effective on iron and steel surfaces.
- Easily washes off before powder coat or paint application.
SPECIFICATION
CONTAINERS
G21 Rust Inhibitor
Available—1 gallon, 5 gallon pail, 30 and 55 gallon drums
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
J13 Fish-Eye Eliminator
- Helps prevent fish eye depressions caused by silicone contamination.
- Improves flow-out and gloss.
SPECIFICATION
CONTAINERS
J13 Fish-Eye Eliminator
Available—1 quart and 1 gallon container
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
J12 Lacquer Retarder
- Helps eliminate blushing in extreme humid or cold conditions.
- Prevents orange peel cause by rapid drying.
- Add to spray lacquer so the lacquer can be brushed and still achieve good flow-out gloss.
SPECIFICATION
CONTAINERS
J12 Lacquer Retarder
Available—1 gallon and 5 gallon pail.
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
J4 Slow Flash Thinner
- Excellent thinner for warm or humid environments.
- Helps prevent blushing.
SPECIFICATION
CONTAINERS
J4 Slow Flash Thinner
Available—1 gallon, 5 gallon pail, 30 and 55 gallon drums
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
J3 Mineral Spirits
- High quality aliphatic hydrocarbon blend
- Used for thinning enamels, varnishes and polyurethanes.
SPECIFICATION
CONTAINERS
J3 Mineral Spirits
Available—1 gallon, 5 gallon pail, 30 and 55 gallon drums
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
R2 Non-Flammable Organic Rinse
- Oil based slow evaporating stripper rinse.
SPECIFICATION
CONTAINERS
R2 Non-Flammable Organic Rinse
- Available—5 gallon pail, and 55 gallon drum.
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
CV 65 Economical After-Wash Rinse
- Stripper rinse
SPECIFICATION
CONTAINERS
CV 65 Economical After-Wash Rinse
Available—5 gallon pail, and 55 gallon drum.
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
R3 Premium Afterwash
- Rapid evaporating stripper rinse
SPECIFICATION
CONTAINERS
R3 Premium Afterwash
Available—5 gallon pail, and 55 gallon drum.
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
J2 Wash Thinner
- Inexpensive, rapid flash thinner.
- Excellent cutting power.
SPECIFICATION
CONTAINERS
J2 Wash Thinner
Available—1 gallon, 5 gallon pail, 30 and 55 gallon drums
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
Sanding Sealer
- Nitrocellulose high build sealer for interior woods.
- Very efficient at filling pores of open grained woods.
- Easy flow out. Does not roll or gum when sanded.
- Blush resistant, fast drying.
- Compatible with a wide range of topcoats.
SPECIFICATION
- Weight Solids—20.6%
- Viscosity—30-35 seconds # Zahn
- Recommended Film Thickness—5-6 mils wet
- Drying time (72F) To touch—5-10 minutes
- To handle—10-20 minutes
- To recoat—20 minutes
- To sand—20 minutes
- Flash Point—Less than 73 degrees F
- VOC Content—646 grams / liter
CONTAINERS
- Available—1 gallon and 5 gallon pails
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
Flat Nitrocellulose Precatalyzed Lacquers
High quality, durable Precatalyzed finishes for improved performance and durability for finishing interior wood products.
These Precatalyzed lacquers contain ureaformaldehyde resin cross-linked by sulfonic acid catalyst. Formaldehyde levels in the product are low.
Blush resistant, rapid drying coatings with excellent cold check resistance, excellent print resistance and excellent adhesion.
Provides improved resistance to household chemicals.
Excellent mar resistance, chemical and water resistant film.
SPECIFICATION
- UV resistant, Mar Resistant, Chemical and Moisture Resistant
- M76 – 40 sheen ( Gloss is 60 degrees)
- Weight Solids—22 – 24%
- Viscosity—30-35 seconds # Zahn
- Recommended Film Thickness—5-6 mils wet <ax 3 mils dry film thickness
- Drying time (72F) To touch—5-10 minutes
- To handle—10-20 minutes
- To recoat—20 minutes
- To sand—20 minutes
- Flash Point—Less than 73 degrees F
- VOC Content—658 grams / liter
CONTAINERS
- Available—1 gallon and 5 gallon pails
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
Semi Gloss/Satin Nitrocellulose Precatalyzed Lacquers
- High quality, durable Precatalyzed finishes for improved performance and durability for finishing interior wood products.
- These Precatalyzed lacquers contain ureaformaldehyde resin cross-linked by sulfonic acid catalyst. Formaldehyde levels in the product are low.
- Blush resistant, rapid drying coatings with excellent cold check resistance, excellent print resistance and excellent adhesion.
- Provides improved resistance to household chemicals.
- Excellent mar resistance, chemical and water resistant film.
SPECIFICATION
- UV resistant, Mar Resistant, Chemical and Moisture Resistant
- M75 – 60 sheen ( Gloss is 60 degrees)
- Weight Solids—22 – 24%
- Viscosity—30-35 seconds # Zahn
- Recommended Film Thickness—5-6 mils wet <ax 3 mils dry film thickness
- Drying time (72F) To touch—5-10 minutes
- To handle—10-20 minutes
- To recoat—20 minutes
- To sand—20 minutes
- Flash Point—Less than 73 degrees F
- VOC Content—658 grams / liter
CONTAINERS
- Available—1 gallon and 5 gallon pails
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
Gloss Nitrocellulose Precatalyzed Lacquers
- High quality, durable Precatalyzed finishes for improved performance and durability for finishing interior wood products.
- These Precatalyzed lacquers contain ureaformaldehyde resin cross-linked by sulfonic acid catalyst. Formaldehyde levels in the product are low.
- Blush resistant, rapid drying coatings with excellent cold check resistance, excellent print resistance and excellent adhesion.
- Provides improved resistance to household chemicals.
- Excellent mar resistance, chemical and water resistant film.
SPECIFICATION
- UV resistant, Mar Resistant, Chemical and Moisture Resistant
- Weight Solids—22 – 24%
- Viscosity—30-35 seconds # Zahn
- Recommended Film Thickness—5-6 mils wet <ax 3 mils dry film thickness
- Drying time (72F) To touch—5-10 minutes
- To handle—10-20 minutes
- To recoat—20 minutes
- To sand—20 minutes
- Flash Point—Less than 73 degrees F
- VOC Content—658 grams / liter
CONTAINERS
- Available—1 gallon and 5 gallon pails
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
Flat Nitrocellulose Lacquers
- Alcohol and water resistant.
- Formulated with the highest quality resins, plasticizers and solvents.
- Blush resistant, rapid drying, and excellent cold check resistance and adhesion.
SPECIFICATION
- Sheen—30-40 (Gloss is 60 degrees)
- Weight Solids—22.5% – 23%
- Viscosity—30-35 seconds # Zahn
- Recommended Film Thickness—5-6 mils wet
- Drying time (72F) to touch—5-10 minutes
- To handle—10-20 minutes
- To recoat—20 minutes
- Flash Point Less—than 73 degrees F
- VOC Content—798 grams/liter
CONTAINERS
- Available—1 gallon and 5 gallon pails
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
Semi-Gloss/Satin Nitrocellulose Lacquer
- Alcohol and water resistant.
- Formulated with the highest quality resins, plasticizers and solvents.
- Blush resistant, rapid drying, and excellent cold check resistance and adhesion.
- Can be rubbed for higher sheen.
SPECIFICATION
- Sheen—55-65 (Gloss is 60 degrees)
- Weight Solids—22.5% – 23%
- Viscosity—30-35 seconds # Zahn
- Recommended Film Thickness—5-6 mils wet
- Drying time (72F) to touch—5-10 minutes
- To handle—10-20 minutes
- To recoat—20 minutes
- Flash Point Less—than 73 degrees F
- VOC Content—798 grams/liter
CONTAINERS
- Available—1 gallon and 5 gallon pails
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
Gloss Nitrocellulose Lacquer
- Alcohol and water resistant.
- Formulated with the highest quality resins, plasticizers and solvents.
- Blush resistant, rapid drying, and excellent cold check resistance and adhesion.
- Can be rubbed for higher sheen.
SPECIFICATION
- Sheen—85-90 (Gloss is 60 degrees)
- Weight Solids—22.5% – 23%
- Viscosity—30-35 seconds # Zahn
- Recommended Film Thickness—5-6 mils wet
- Drying time (72F) to touch—5-10 minutes
- To handle—10-20 minutes
- To recoat—20 minutes
- Flash Point Less—than 73 degrees F
- VOC Content—798 grams/liter
CONTAINERS
- Available—1 gallon and 5 gallon pails
- DESCRIPTION
- SPECIFICATION
- CONTAINERS
DESCRIPTION
J1 Lacquer Thinner
- Medium flash thinner with superb cutting and thinning power.
- Recommended to use on all solvent-borne lacquers, sealers and finishes.
- Formulated with the highest quality virgin solvents.
SPECIFICATION
CONTAINERS
J1 Lacquer Thinner
Available—1 gallon, 5 gallon pail, 30 and 55 gallon drums