Product Category: Eco-Friendly Strippers

More Info

B94 is the perfect stripper for those removing finishes from both wood and metal. It strips relatively quickly and is the best choice for those who cannot use a methylene chloride based product due to state regulations or environment. B94 is gentler than B96 for softer metals. Will still remove tough epoxies, polyurethane and paints but with longer stripping times required.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B94

  • Liquid stripper.
  • Low evaporation rate.
  • Less corrosive than B96, safer for softer metals.
  • For use on conventional paints, polyurethanes, and epoxies.  Slower acting than B17.
  • Appropriate for all metal surfaces.
  • Safety gear and proper ventilation necessary while using this product.

SPECIFICATION

CONTAINERS

Available in 5, 55 and “Special Order” 275 gallon totes.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

More Info

A non-methylene chloride formula for use on coated metal finishes, architectural railings and aluminum windows. Can also be used for wood decks.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B95

  • Semi-paste.
  • Low evaporation rate.
  • Ideal aircraft stripper.
  • Slower acting than B14.
  • Appropriate for wood, metal, concrete & brick
  • Safety gear and proper ventilation necessary while using this product.

SPECIFICATION

  • Specific Gravity1.01  (8.41 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—0 grams/liter    
  • Boiling Point—219 degrees F
  • Freeze Point—Less than -30 F
  • Flash Point—>200 degrees F

CONTAINERS

Available in 5 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

 

More Info

Sounds like a radio station but is actually our most aggressive non-methylene chloride stripper. B96 is the alternative for B17 where state regulations or management prohibit use of MCL products.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B96

  • Liquid stripper.
  • Low evaporation rate.
  • Corrosive, most aggressive non-MCL stripper.
  • For use on conventional paints, polyurethanes, epoxies and powdercoat.
  • Appropriate for all metal surfaces.
  • Safety gear and proper ventilation necessary while using this product.

SPECIFICATION

  • Specific Gravity1.01  (8.41 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—15 grams/liter   (0.125 lbs / gal)
  • Vapor Pressure—.1mm Hg   
  • Boiling Point—219 degrees F
  • Freeze Point—Less than -30 F
  • Flash Point—>200 degrees F

CONTAINERS

Available in 5, 55 gallon drums and “Special Order” 275 gallon totes.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

BSI Companies | Benco Sales, Inc. | Besway Systems
123 Stout Drive, Crossville, TN 38555