Benco Sales > Wood Strippers > Semi-Paste Wood Strippers

Benco Sales Semi-Paste wood strippers are formulated with the highest quality solvents, surfactants and additives. They have a long wet life and will cling to vertical surfaces. Semi-paste strippers should be applied by brush or roller in one direction. Some semi-paste  strippers are able to be used in high pressure stainless spray guns with Teflon® tip. Safety gear and proper ventilation is imperative when using any BSI strippers. All BSI Semi-Paste strippers work great on wood, concrete and other surfaces.

More Info

The Fastest Way to Remove Stubborn Graffiti from Stone and Concrete

B4 is our most aggressive semi-paste wood stripper. Widely used in the furniture and architectural restoration industry, B4 can be applied with a brush or roller. B4 is a semi-paste stripper selected for its “cling-ability” on vertical surfaces in architectural environments. Often used for heavily painted doors, log homes, and paint on concrete surfaces. An excellent choice for stripping decks. B4 removes epoxies and tough old paint finishes quickly and easily.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B4

  • Semi-paste, non-flammable, water rinsable.
  • Rapidly strips polyurethanes, catalyzed lacquers, acrylics, latex, enamels, shellacs, varnishes and lacquers.
  • Long wet life and will cling to vertical surfaces.
  • Apply by brush or roller, brushing in 1 direction only.

SPECIFICATION

  • Specific Gravity—1.19 (9.95 lbs./gal)
  • Percent Volatile— >95%
  • VOC Content—111.78  grams/liter      (.931lbs./gal)
  • Boiling Point—104 degrees F
  • Freeze Point—Less than -40 F
  • Flash Point—N / A

CONTAINERS

Available in 5, 30 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

T21 is an original Besway product that we have continued to manufacture for loyal customers.It is comparable to B5 in that it is most often used for removing concrete sealers, deck coatings, and is the perfect choice for removing finishes from delicate veneers since it will not delaminate.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Besway T21 

  • Semi-paste, non-flammable, water rinsable.
  • Rapidly strips polyurethanes, catalyzed lacquers, acrylics, latex, enamels, shellacs, varnishes and lacquers.
  • Long wet life and will cling to vertical surfaces.
  • Apply by brush or roller, brushing in 1 direction only.

SPECIFICATION

  • Specific Gravity—1.19 (9.95 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—111 grams/liter      (0.931lbs./gal)
  • Boiling Point—104 degrees F
  • Freeze Point—Less than -40 F
  • Flash Point—N / A

CONTAINERS

Available in 5 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

Similar to B4 except in a spray viscosity. Great for covering large areas of vertical surfaces of concrete, brick and painted brick homes quickly and efficiently.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B31

  • Spray viscosity, non-flammable, water rinsable.
  • Strips most paints and finishes.
  • Will cling to vertical surfaces when sprayed.
  • Apply by brush or sprayer, brushing in 1 direction only. Spray with stainless steel spray system constructed of steel, polyethylene, or polypropylene components.

SPECIFICATION

  • Specific Gravity—1.18  (9.87 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—112 grams/liter     
  • Boiling Point—104 degrees F
  • Freeze Point—Less than -40 F
  • Flash Point—N / A

CONTAINERS

Available in 5 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

A non-MCL formula for use on coated metal finishes, architectural railings and aluminum windows. Can also be used for wood decks. Perfect for removing graffiti from stone and concrete where states don’t allow MCL products or for those not possessing a Business ID (EIN)

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B95

  • Semi-paste
  • Low evaporation rate.
  • Ideal aircraft stripper.
  • Appropriate for wood, metal, concrete & brick
  • Safety gear and proper ventilation necessary while using this product.

SPECIFICATION

CONTAINERS

Available in 5 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

More Info
  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B24

  • Semi-paste, NMP-based, water rinsable, non-flammable.
  • Effective on shellacs, varnishes, lacquers, polyurethanes, enamels and acrylics.
  • Long wet life and will cling to surfaces.
  • Apply by brush or roller, brushing in 1 direction only.

SPECIFICATION

  • Specific Gravity—1.01  (8.41 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—536 grams/liter    
  • Boiling Point—329 degrees F
  • Freeze Point—Less than -30 F
  • Flash Point—140 degrees F

CONTAINERS

Available in 5 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

BSI Companies | Benco Sales, Inc. | Besway Systems
123 Stout Drive, Crossville, TN 38555

Phone: 931.484.9578
Fax: 931.484.7614
Download Print Catalog
MENU